FDA Medical devices recall ·

Straight Inflow/Outflow Patient Line Kit recall

Recall number
Z-1675-2025
Date
(initiated March 31, 2025)
Company / brand
Belmont Instrument LLC
780 Boston Rd, Billerica, MA, United States
Category
Medical devices › Class II
Classification
Class II
Status
Ongoing
Units affected
208 sets
Initiated by
Voluntary: Firm initiated

Read the official FDA notice ↗

Product

Straight Inflow/Outflow Patient Line Kit. Model Number: 902-00037. Sterile, single-use, disposable set used with the Hyperthermia Pump. The Straight Inflow/Outflow Patient Line Kit (P/N 902-00037) consists of 4.4 Liter Reservoir (P/N 902-00034P), Heat Exchanger set (P/N 902-00006P) and Straight Inflow/Outflow Patient Line (P/N 902-00039P). The three components are packaged separately in individual pouches and boxes and placed in the same case for shipment. All three components are connected prior to use. The female quick connector that may be cracked is located on the Heat Exchanger set (P/N 902-00006P).

Why was it recalled?

Potential crack in the female connector located on the Heat Exchanger in the set, which will lead to a fluid leak through the crack during priming of the rapid infuser.

What should you do?

FDA enforcement reports do not list a consumer remedy. Check the product codes below against what you have; if it matches, stop using it and follow the instructions in the firm's or FDA's official notice, or contact the company. If you have health concerns, contact your healthcare provider.

Product codes & lot numbers

Model Number: 902-00037. UDI-DI: 00896128002213. Lot Numbers: 20241012, 20241107

Distribution

Worldwide - US Nationwide distribution in the states of AZ, CA, CO, CT, DC, IL, IN, KS, KY, MA, ME, MN, NC, ND, NJ, NM, OH, OR, PA, SC, TN, TX, VA, VT, WA, WI, WV and the countries of Canada, Hungary, Korea (the Republic of), Latvia, Malaysia.

States: Arizona California Colorado Connecticut District of Columbia Illinois Indiana Kansas Kentucky Massachusetts Maine Minnesota North Carolina North Dakota New Jersey New Mexico Ohio Oregon Pennsylvania South Carolina Tennessee Texas Virginia Vermont Washington Wisconsin West Virginia

What does Class II mean?

Class II means use of or exposure to the product may cause temporary or medically reversible adverse health consequences, or the probability of serious harm is remote.

Source: FDA (medical devices), recall Z-1675-2025. Official notice. Republished from public data; RecallFlag is not affiliated with the FDA.